^
Vaccines

Vaccines

Flock specific vaccines –
we offer the complete service

If no commercial vaccines are available flock specific vaccines provide a solution to protect our costumer’s livestock against pathogens.

Contact Person Poultry
SALES
Klaus Torborg
Phone +49 171 / 5 15 26 09
Consultation
Dr. Swaantje Rönchen
Certified Veterinary Specialist in Poultry
Phone +49 44 73 / 94 38 - 52
CONTACTS_MOBILE +49 171 / 775 12 30
Consultation
Dr. Diana Petzoldt
Veterinary
Phone +49 44 73 / 94 38 - 786
CONTACTS_MOBILE +49 152 / 226 567 62

Poultry

AniCon Labor GmbH produces custom made bacterial and viral vaccines for farm livestock.
Custom made vaccines (CMVs) are produced from bacteria and/or viruses, which were isolated from diseased animals. This vaccine is specifically only to be used in animals of the farm the isolates has been isolated from or in animal which are reared and will be moved to this origin farm.

Big pharmaceutical companies often are not interested in going through extensive approval procedures or to proceed with existing approvals regarding vaccines for minor use ore minor species. Therefore custom made vaccines provide a solution if no commercial vaccines are available.

Pathogens could change over time in their antigenic characteristics. Therefore the protective efficiency of antigens in commercial vaccines possibly might decrease.

To achieve the best possible protective effect of a CMV it is important to continuously check the situation of pathogens in a flock for always being up to date with the composition of the vaccine. The production of CMVs requires an official approval of the laboratory, which is based on appropriate technical facilities and specific production procedures.

After successful isolation of pathogens, the isolates have to be further characterized (e.g. serotype, virulence factors). Selected pure isolates has to be propagated. In various steps the harvested isolates are finally processed into a vaccine.

One of those steps includes the addition of an adjuvant to stimulate the immune response of the vaccinated animal. We routinely use aluminium hydroxide for aqueous vaccines, incomplete Freund’sches adjuvans for water-in-oil-vaccines and commercial oil-in-water adjuvants.

CMVs are always inactivated, they do not contain pathogens which are able to propagate. Normally they are parenterally injected, that means application to each individual animal.

As CMVs are produced individually for each request, we needs approximately 4 – 6 weeks (bacterial vaccines) or 6 – 8 weeks (viral vaccines/combinations of viral and bacterial pathogens) from the placed order to delivery of the vaccine. During this period for each request, the bacterial and/or viral isolates are characterized, the antigen are propagated and finally the quality of the vaccine is determined. This quality control is performed in accordance to the European pharmacopoeia.

So please note the delivery periods for each order!

Contact person swine
Sales
Dr. Klaus Teich
Veterinary
Phone +49 44 73 / 94 38 - 794
CONTACTS_MOBILE 0 172 / 5 48 43 36
Consultation
Dr. Carina Helmer
Veterinary
Phone +49 44 73 / 94 38 - 798
CONTACTS_MOBILE +49 152 / 23724956

Swine

AniCon Labor GmbH produces custom made bacterial and viral vaccines for farm livestock.
Custom made vaccines (CMVs) are produced from bacteria and/or viruses, which were isolated from diseased animals. This vaccine is specifically only to be used in animals of the farm the isolates has been isolated from or in animal which are reared and will be moved to this origin farm.

Big pharmaceutical companies often are not interested in going through extensive approval procedures or to proceed with existing approvals regarding vaccines for minor use ore minor species. Therefore custom made vaccines provide a solution if no commercial vaccines are available.

Pathogens could change over time in their antigenic characteristics. Therefore the protective efficiency of antigens in commercial vaccines possibly might decrease.

To achieve the best possible protective effect of a CMV it is important to continuously check the situation of pathogens in a flock for always being up to date with the composition of the vaccine. The production of CMVs requires an official approval of the laboratory, which is based on appropriate technical facilities and specific production procedures.

After successful isolation of pathogens, the isolates have to be further characterized (e.g. serotype, virulence factors). Selected pure isolates has to be propagated. In various steps the harvested isolates are finally processed into a vaccine.

One of those steps includes the addition of an adjuvant to stimulate the immune response of the vaccinated animal. We routinely use aluminium hydroxide for aqueous vaccines, incomplete Freund’sches adjuvans for water-in-oil-vaccines and commercial oil-in-water adjuvants.

CMVs are always inactivated, they do not contain pathogens which are able to propagate. Normally they are parenterally injected, that means application to each individual animal.

As CMVs are produced individually for each request, we needs approximately 4 – 6 weeks (bacterial vaccines) or 6 – 8 weeks (viral vaccines/combinations of viral and bacterial pathogens) from the placed order to delivery of the vaccine. During this period for each request, the bacterial and/or viral isolates are characterized, the antigen are propagated and finally the quality of the vaccine is determined. This quality control is performed in accordance to the European pharmacopoeia.

So please note the delivery periods for each order!

Contact person Cattle
Sales
Dr. Klaus Teich
Veterinary
Phone +49 44 73 / 94 38 - 794
CONTACTS_MOBILE 0 172 / 5 48 43 36
Consultation
Dr. Carina Helmer
Veterinary
Phone +49 44 73 / 94 38 - 798
CONTACTS_MOBILE +49 152 / 23724956

Cattle

AniCon Labor GmbH produces custom made bacterial and viral vaccines for farm livestock.
Custom made vaccines (CMVs) are produced from bacteria and/or viruses, which were isolated from diseased animals. This vaccine is specifically only to be used in animals of the farm the isolates has been isolated from or in animal which are reared and will be moved to this origin farm.

Big pharmaceutical companies often are not interested in going through extensive approval procedures or to proceed with existing approvals regarding vaccines for minor use ore minor species. Therefore custom made vaccines provide a solution if no commercial vaccines are available.

Pathogens could change over time in their antigenic characteristics. Therefore the protective efficiency of antigens in commercial vaccines possibly might decrease.

To achieve the best possible protective effect of a CMV it is important to continuously check the situation of pathogens in a flock for always being up to date with the composition of the vaccine. The production of CMVs requires an official approval of the laboratory, which is based on appropriate technical facilities and specific production procedures.

After successful isolation of pathogens, the isolates have to be further characterized (e.g. serotype, virulence factors). Selected pure isolates has to be propagated. In various steps the harvested isolates are finally processed into a vaccine.

One of those steps includes the addition of an adjuvant to stimulate the immune response of the vaccinated animal. We routinely use aluminium hydroxide for aqueous vaccines, incomplete Freund’sches adjuvans for water-in-oil-vaccines and commercial oil-in-water adjuvants.

CMVs are always inactivated, they do not contain pathogens which are able to propagate. Normally they are parenterally injected, that means application to each individual animal.

As CMVs are produced individually for each request, we needs approximately 4 – 6 weeks (bacterial vaccines) or 6 – 8 weeks (viral vaccines/combinations of viral and bacterial pathogens) from the placed order to delivery of the vaccine. During this period for each request, the bacterial and/or viral isolates are characterized, the antigen are propagated and finally the quality of the vaccine is determined. This quality control is performed in accordance to the European pharmacopoeia.

So please note the delivery periods for each order!

Contact person fish
Sales
Dr. Klaus Peter Behr
Veterinary
Phone +49 44 73 / 94 38 - 22
Consultation
Martin Liman, PhD
Certified Veterinary Specialist in Microbiology
Phone +49 44 73 / 94 38 - 24
Consultation
Dr. Diana Petzoldt
Veterinary
Phone +49 44 73 / 94 38 - 786

Fish

AniCon Labor GmbH produces custom made bacterial and viral vaccines for farm livestock.
Custom made vaccines (CMVs) are produced from bacteria and/or viruses, which were isolated from diseased animals. This vaccine is specifically only to be used in animals of the farm the isolates has been isolated from or in animal which are reared and will be moved to this origin farm.

Big pharmaceutical companies often are not interested in going through extensive approval procedures or to proceed with existing approvals regarding vaccines for minor use ore minor species. Therefore custom made vaccines provide a solution if no commercial vaccines are available.

Pathogens could change over time in their antigenic characteristics. Therefore the protective efficiency of antigens in commercial vaccines possibly might decrease.

To achieve the best possible protective effect of a CMV it is important to continuously check the situation of pathogens in a flock for always being up to date with the composition of the vaccine. The production of CMVs requires an official approval of the laboratory, which is based on appropriate technical facilities and specific production procedures.

After successful isolation of pathogens, the isolates have to be further characterized (e.g. serotype, virulence factors). Selected pure isolates has to be propagated. In various steps the harvested isolates are finally processed into a vaccine.

One of those steps includes the addition of an adjuvant to stimulate the immune response of the vaccinated animal. We routinely use aluminium hydroxide for aqueous vaccines, incomplete Freund’sches adjuvans for water-in-oil-vaccines and commercial oil-in-water adjuvants.

CMVs are always inactivated, they do not contain pathogens which are able to propagate. Normally they are parenterally injected, that means application to each individual animal.

As CMVs are produced individually for each request, we needs approximately 4 – 6 weeks (bacterial vaccines) or 6 – 8 weeks (viral vaccines/combinations of viral and bacterial pathogens) from the placed order to delivery of the vaccine. During this period for each request, the bacterial and/or viral isolates are characterized, the antigen are propagated and finally the quality of the vaccine is determined. This quality control is performed in accordance to the European pharmacopoeia.

So please note the delivery periods for each order!


Laboratory database

We will activate the link to our laboratory database soon.
With a registered LOGIN you can access detailed information.

Quality Management & Consulting

Accreditation
DAkkS certificate PL-14290-01: Our work concerning the veterinary field and feed and food testing including drinking water are accredited according to 17025:2005. Our laboratory work in the fields mentioned above includes the bacteriological, serological and molecular biological diagnostic as well as the microbiological and chemical analytics.

Quality Policy
As a service laboratory AniCon Labor GmbH was founded in mid 2005.

The scope of services includes chemical, microbiological and molecular biological analysis of feed, food and drinking water as well as pathologic-anatomical and laboratory investigations of livestock. The scope of services also includes the production of flock specific vaccines, the production of in-vitro diagnostics as well as consulting activities.

Within its flexible accreditation and according to the marking in the annex of accreditation certificate, the AniCon Labor GmbH has the opportunity to include further methods into the scope of accreditation:

Within the testing ranges indicated with * and following the corresponding validation the free choice of standardized test methods or equated standardized test methods after is possible.

Within the testing ranges indicated with ** the modification and further and new development of test methods is possible.

The technical employees work according to the general principles and procedure instructions of DIN EN ISO/IEC 17025 and are familiar with the quality documentation.

The laboratory services are described within the documentation system and are carried out according to the descriptions. To ensure an ongoing review the laboratory regularly participates in proficiency test.